Servo wireless remote control photographic lens |
|
With the filmmakers in the special and difficult, full three-dimensional, small-venue photography needs, wireless remote control servo system has been applied widely, and in the modern film photography plays an important role. Photographic lens servo wireless remote control system consists of: The remote host system, transmitter, receiver, servo actuators composed of four parts. Key Features: 1, the use of microprocessor control, can achieve both PCM and PPM modulation; 2, 3-way 3-way ratio-based channel and limit controller, 1 camera control switches; 3, the use of PPM programming pulse width, pulse frequency modulation on the subcarrier and the subcarrier frequency of the FM carrier frequency. 4, the remote control device has strong anti-interference ability, high reliability and not less than 1 km away from the remote control and low voltage alarm. Technical data: 1, temperature range: -20 degrees - +50 degrees Celsius; 2, Power: 9.6V 6V (for the servo); 3, the maximum torque: 1Nm; 4, set the time: in 6V, 2 r / s, torque 0.25Nm; 5, noise: <40dB (A) (n <0.5 rev / sec); 6, the location accuracy: <0.5 degrees
|